| CG2535-NC1 | ||
| Capacity | Max. Swivel overtable ( mm ) | 250 |
| Max. distance between center ( mm ) | 350 | |
| Max . External grinding diameter ( mm ) | 250 | |
| Max . Load of centers ( kg ) | 80 | |
| Grinding Wheel | ( OD x width x ID ) Wheel size | 355 x 38 x 101.6 / 127 |
| Spindle variable speed change | 2 | |
| Speed ( rpm ) | 1900 : 1500 | |
| Wheel head | Front and back travel distance ( mm ) | 150 |
| Swivel angle | ±30⁰ | |
| Table | Swivel angle | 8⁰ , -4⁰ |
| Table span ( mm ) | 150 | |
| Workhead | Center | M .T.4 |
| Speed ( rpm ) | 0 – 300 | |
| Swivel angle | 90⁰ | |
| Tailstock | Center | M.T. 3 |
| Stroke distance ( mm ) | 25 | |
| Feed slide | X-axis minimum resolution increment ( mm) | 0.001 |
| X-axis rapid feed rate ( m/min ) | 0 – 6 | |
| Z-axis rapid feer rate | 0 – 4 | |
| Motor | Grinding wheel motor ( HP ) | 5 |
| Spindle motor ( HP) | 1/2 | |
| X-axis servo motor ( kW ) | 1 | |
| Z-axis motor (HP ) | 1/2 | |
| table Lubricator motor ( HP ) | 1/8 | |
| Wheel head lubricator motor ( HP ) | 1/8 | |
| Coolant pump ( HP ) | 1/8 | |
| Machine Measurement |
L x W x H ( mm ) | 2000 x 1450 x 1550 |
| Gross weight ( kg ) | 2550 | |